en
News
News

What are the common problems with nail box machines

11 Jun, 2024 12:56pm

When there are nails inside the stapler head of the nail box machine, it is often easy to affect the normal operation of the clutch. You can open the side cover of the stapler head, take out the punch for cleaning and cleaning, add lubricating oil, and then reinstall it;
If the positioning of the head is inaccurate, check whether the F3 fuse 34-35 (AC), F9 fuse 50-51 (DC), and brake coil resistance wire (15 Ω) are normal; If there is continuous nailing action on the nail head, check if the electrical appliances are damaged.
If the photoelectric induction of the cardboard board is abnormal, the photoelectric induction device can be adjusted to maintain a moderate distance of induction, ensuring that the cardboard board can move normally after being fed.
To reduce the occurrence of the above problems, attention should be paid to the following points: using high-quality flat wire with good steel properties and smooth surface coating; Check if the various parts of the wire delivery are poorly adjusted and cause jamming; It is advisable to adjust the relevant components of the machine so that the wire feeding movement can be maintained easily and freely; Take corresponding repair or replacement measures for severely worn bottom molds.